Design and Thermal Analysis of Cubic Boron Nitride Cutting Tools for High-Performance Machining Applications

Authors:
R. Kumutha, V. Balaji, S. Raja, Saly Jaber, Fatma Bassyouni, Fatima Hamouche, Selçuk Bulat

Addresses:
Department of Mechanical Engineering, Loyola Institute of Technology, Chennai, Tamil Nadu, India. Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India. Department of Analytical Chemistry, Saint Joseph University, Beirut, Beirut Governorate, Lebanon. Department of Chemistry of Natural and Microbial Products, National Research Centre, Cairo, Egypt. Department of Chemistry, Ibn Tofail University, Kenitra, Rabat-Salé-Kénitra, Morocco. Department of Nanoscience and Nanoengineering, Institute of Natural Sciences, Sakarya University, Serdivan, Sakarya, Turkey.

Abstract:

Cutting tools play a major role in manufacturing end products of the desired shape and size for high-end engineering applications. Cutting tool life is mainly influenced by the thermal stability and heat resistance of the cutting tool. The aim of this research is to design and thermally analyze a Cubic Boron Nitride (CBN) cutting tool for high-performance machining applications such as Laser Assisted Machining (LAM). The geometry of the cutting tool was constructed using a commonly used computer-aided design (CAD) software, namely, Creo Parametric. Then, the thermal behavior of the tool under the machining circumstances was evaluated by utilizing ANSYS to perform finite element thermal analysis. Key thermal performance metrics such as maximum temperature, minimum temperature, temperature distribution and total heat flow were studied to evaluate the effectiveness of the proposed tool material. The thermal performance of the CBN cutting tool was experimentally compared to a typical Inconel 718 cutting tool that is widely used for high-temperature machining applications. The simulation results show that the CBN cutting tool has better thermal stability, better heat dissipation characteristics and less thermal loading than the Inconel 718 tool. The results show that the developed CBN cutting tool may greatly improve the machining performance, tool life and reliability of the process in laser-assisted machining applications.

Keywords: Cubic Boron Nitride (CBN); Temperature Distribution; Machining Performance; Computer-Aided Design (CAD); Thermal Loading; Laser-Assisted Machining (LAM).

Received on: 20/08/2025, Revised on: 29/11/2025, Accepted on: 10/12/2025, Published on: 07/10/2026

DOI: 10.69888/FTSSM.2026.000818

FMDB Transactions on Sustainable Structures and Materials, 2026 Vol. 2 No. 2, Pages: 121-130

  • Views : 75
  • Downloads : 9
Download PDF